From 4d0424e4654592ef81b72f60f4aa4878165fc53b Mon Sep 17 00:00:00 2001 From: Alex Auvolat Date: Thu, 9 Mar 2023 14:53:29 +0100 Subject: add README --- README.md | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 README.md diff --git a/README.md b/README.md new file mode 100644 index 0000000..129a34f --- /dev/null +++ b/README.md @@ -0,0 +1,22 @@ +# wgautomesh + +`wgautomesh` is a simple utility to help configure a full-mesh wireguard network. +It does not assume that all nodes have a publicly reachable address. It uses a +gossip protocol to broadcast the endpoint addresses nodes use to talk to one +another. This way, even if nodes A and B are not able to communicate directly +initially (both behind NAT), if they can both communicate with node C then they +will indirectly be able to know each other's NAT-ed address and port. They will +then try to connect to one another using those addresses, which should allow +NAT hole punching. + +Features: + +- does not assume all nodes are publicly reachable +- configuration very similar to `wg-quick`: each node needs a list of the credentials of all other nodes in the mesh +- `wgautomesh` does not create a wireguard interface, it assumes it exists and merely configures the peers attached to it +- ultra simple encrypted gossip protocol over UDP (bincode encoding + xsalsa20poly1305 symmetric encryption) +- automatic discovery of nodes in a same LAN using UDP broadcast (if enabled, nodes will prefer connecting to one another using their LAN IP addresses when available) +- can automatically open ports in your router using IGD/UPnP + +**`wgautomesh` only tries to establish connectivity to the peers specified in its config file**, +it does not provide facilities for dynamically adding more peers like many wireguard configuration tools do. -- cgit v1.2.3