aboutsummaryrefslogtreecommitdiff
path: root/app/jitsi/integration/jvb/videobridge.conf
diff options
context:
space:
mode:
Diffstat (limited to 'app/jitsi/integration/jvb/videobridge.conf')
-rw-r--r--app/jitsi/integration/jvb/videobridge.conf290
1 files changed, 290 insertions, 0 deletions
diff --git a/app/jitsi/integration/jvb/videobridge.conf b/app/jitsi/integration/jvb/videobridge.conf
new file mode 100644
index 0000000..a11edc6
--- /dev/null
+++ b/app/jitsi/integration/jvb/videobridge.conf
@@ -0,0 +1,290 @@
+videobridge {
+ entity-expiration {
+ # If an entity has no activity after this timeout, it is expired
+ timeout=1 minute
+
+ # The interval at which the videobridge will check for expired entities
+ check-interval=${videobridge.entity-expiration.timeout}
+ }
+ health {
+ # The interval between health checks
+ interval=10 seconds
+
+ # The timeout for a health check
+ timeout=30 seconds
+
+ # If performing a health check takes longer than this, it is considered unsuccessful.
+ max-check-duration=3 seconds
+
+ # Whether or not health check failures should be 'sticky'
+ # (i.e. once the bridge becomes unhealthy, it will never
+ # go back to a healthy state)
+ sticky-failures=false
+ }
+ ep-connection-status {
+ # How long we'll wait for an endpoint to *start* sending
+ # data before we consider it 'inactive'
+ first-transfer-timeout=15 seconds
+
+ # How long an endpoint can be 'inactive' before it will
+ # be considered disconnected
+ max-inactivity-limit=3 seconds
+
+ # How often we check endpoint's connectivity status
+ check-interval=500 milliseconds
+ }
+ cc {
+ bwe-change-threshold=0.15
+ thumbnail-max-height-px=180
+ onstage-ideal-height-px=1080
+ onstage-preferred-height-px=360
+ onstage-preferred-framerate=30
+ enable-onstage-video-suspend=false
+ trust-bwe=true
+
+ # How often we check to send probing data
+ padding-period=15ms
+
+ # How often we'll force recalculations of forwarded
+ # streams
+ max-time-between-calculations = 15 seconds
+
+ # A JVB-wide last-n value, observed by all endpoints. Endpoints
+ # will take the minimum of their setting and this one (-1 implies
+ # no last-n limit)
+ jvb-last-n = -1
+ }
+ # The APIs by which the JVB can be controlled
+ apis {
+ xmpp-client {
+ # The interval at which presence is published in the configured MUCs.
+ presence-interval = ${videobridge.stats.interval}
+
+ configs {
+ unique-xmpp-server {
+ hostname="jitsi-xmpp"
+ domain = "auth.jitsi"
+ username = "jvb"
+ password = "jvbpass"
+ port = 5222
+ muc_jids = "jvbbrewery@internal.auth.jitsi"
+ # The muc_nickname must be unique across all jitsi-videobridge instances
+ muc_nickname = "unique-jvb-server"
+ disable_certificate_verification = false
+ }
+ # example-connection-id {
+ # For the properties which should be
+ # filled out here, see MucClientConfiguration
+ # }
+ }
+ }
+ # The COLIBRI REST API
+ rest {
+ enabled = true
+ }
+ jvb-api {
+ enabled = true
+ }
+ }
+ # Configuration of the different REST APIs.
+ # Note that the COLIBRI REST API is configured under videobridge.apis.rest instead.
+ rest {
+ debug {
+ enabled = true
+ }
+ health {
+ enabled = true
+ }
+ shutdown {
+ # Note that the shutdown API requires the COLIBRI API to also be enabled.
+ enabled = false
+ }
+ version {
+ enabled = true
+ }
+ }
+ http-servers {
+ # The HTTP server which hosts services intended for 'public' use
+ # (e.g. websockets for the bridge channel connection)
+ public {
+ # See JettyBundleActivatorConfig in Jicoco for values
+ port = -1
+ tls-port = -1
+ }
+ # The HTTP server which hosts services intended for 'private' use
+ # (e.g. health or debug stats)
+ private {
+ # See JettyBundleActivatorConfig in Jicoco for values
+ host = 127.0.0.1
+ }
+ }
+ octo {
+ # Whether or not Octo is enabled
+ enabled=false
+
+ # A string denoting the 'region' of this JVB. This region
+ # will be used by Jicofo in the selection of a bridge for
+ # a client by comparing it to the client's region.
+ # Must be set when 'enabled' is true
+ #region="us-west-1"
+
+ # The address on which the Octo relay should bind
+ # Must be set when 'enabled' is true
+ #bind-address=198.51.100.1
+
+ # The port to which the Octo relay should bind
+ bind-port=4096
+
+ # The address which controls the public address which
+ # will be part of the Octo relayId
+ #public-address=198.51.100.1
+
+ # The size of the incoming octo queue. This queue is per-remote-endpoint,
+ # so it matches what we use for local endpoints
+ recv-queue-size=1024
+
+ # The size of the outgoing octo queue. This is a per-originating-endpoint
+ # queue, so assuming all packets are routed (as they currently are for Octo)
+ # it should be the same size as the transceiver recv queue in
+ # jitsi-media-transform. Repeating the description from there:
+ # Assuming 300pps for high-definition, 200pps for standard-definition,
+ # 100pps for low-definition and 50pps for audio, this queue is fed
+ # 650pps, so its size in terms of millis is 1024/650*1000 ~= 1575ms.
+ send-queue-size=1024
+ }
+ load-management {
+ # Whether or not the reducer will be enabled to take actions to mitigate load
+ reducer-enabled = false
+ load-measurements {
+ packet-rate {
+ # The packet rate at which we'll consider the bridge overloaded
+ load-threshold = 50000
+ # The packet rate at which we'll consider the bridge 'underloaded' enough
+ # to start recovery
+ recovery-threshold = 40000
+ }
+ }
+ load-reducers {
+ last-n {
+ # The factor by which we'll reduce the current last-n when trying to reduce load
+ reduction-scale = .75
+ # The factor by which we'll increase the current last-n when trying to recover
+ recover-scale = 1.25
+ # The minimum time in between runs of the last-n reducer to reduce or recover from
+ # load
+ impact-time = 1 minute
+ # The lowest value we'll set for last-n
+ minimum-last-n-value = 0
+ # The highest last-n value we'll enforce. Once the enforced last-n exceeds this value
+ # we'll remove the limit entirely
+ maximum-enforced-last-n-value = 40
+ }
+ }
+ }
+ sctp {
+ # Whether SCTP data channels are enabled.
+ enabled=true
+ }
+ stats {
+ # Whether periodic collection of statistics is enabled or not. When enabled they are accessible through the REST
+ # API (at `/colibri/stats`), and are available to other modules (e.g. to be pushed to callstats or in a MUC).
+ enabled = true
+
+ # The interval at which stats are gathered.
+ interval = 5 seconds
+
+ # Configuration related to pushing statistics to callstats.io.
+ callstats {
+ # An integer application ID (use 0 to disable pushing stats to callstats).
+ app-id = 0
+
+ # The shared secred to authentication with callstats.io.
+ //app-secret = "s3cret"
+
+ # ID of the key that was used to generate token.
+ //key-id = "abcd"
+
+ # The path to private key file.
+ //key-path = "/etc/jitsi/videobridge/ecpriv.jwk"
+
+ # The ID of the server instance to be used when reporting to callstats.
+ bridge-id = "jitsi"
+
+ # TODO: document
+ //conference-id-prefix = "abcd"
+
+ # The interval at which statististics will be published to callstats. This affects both per-conference and global
+ # statistics.
+ # Note that this value will be overriden if a "callstatsio" transport is defined in the parent "stats" section.
+ interval = ${videobridge.stats.interval}
+ }
+ }
+ websockets {
+ enabled=false
+ server-id="default-id"
+
+ # Optional, even when 'enabled' is set to true
+ # tls=true
+ # Must be set when enabled = true
+ #domain="some-domain"
+ }
+ ice {
+ tcp {
+ # Whether ICE/TCP is enabled.
+ enabled = true
+
+ # The port to bind to for ICE/TCP.
+ port = 8089
+
+ # An optional additional port to advertise.
+ # mapped-port = 8443
+ # Whether to use "ssltcp" or plain "tcp".
+ ssltcp = true
+ }
+
+ udp {
+ # The port for ICE/UDP.
+ port = 10000
+ }
+
+ # An optional prefix to include in STUN username fragments generated by the bridge.
+ #ufrag-prefix = "jvb-123:"
+
+ # Which candidate pairs to keep alive. The accepted values are defined in ice4j's KeepAliveStrategy:
+ # "selected_and_tcp", "selected_only", or "all_succeeded".
+ keep-alive-strategy = "selected_and_tcp"
+
+ # Whether to use the "component socket" feature of ice4j.
+ use-component-socket = true
+
+ # Whether to attempt DNS resolution for remote candidates that contain a non-literal address. When set to 'false'
+ # such candidates will be ignored.
+ resolve-remote-candidates = false
+
+ # The nomination strategy to use for ICE. THe accepted values are defined in ice4j's NominationStrategy:
+ # "NominateFirstValid", "NominateHighestPriority", "NominateFirstHostOrReflexiveValid", or "NominateBestRTT".
+ nomination-strategy = "NominateFirstValid"
+ }
+
+ transport {
+ send {
+ # The size of the dtls-transport outgoing queue. This is a per-participant
+ # queue. Packets from the egress end-up in this queue right before
+ # transmission by the outgoing srtp pipeline (which mainly consists of the
+ # packet sender).
+ #
+ # Its size needs to be of the same order of magnitude as the rtp sender
+ # queue. In a 100 participant call, assuming 300pps for the on-stage and
+ # 100pps for low-definition, last-n 20 and 2 participants talking, so
+ # 2*50pps for audio, this queue is fed 300+19*100+2*50 = 2300pps, so its
+ # size in terms of millis is 1024/2300*1000 ~= 445ms.
+ queue-size=1024
+ }
+ }
+
+ version {
+ // Wheather to announe the jitsi-videobridge version to clients in the ServerHello message.
+ announce = false
+ }
+}
+