Move app files into cluster subdirectories; add prod garage

1 files changed, 0 insertions, 290 deletions

diff --git a/app/jitsi/integration/jvb/videobridge.conf b/app/jitsi/integration/jvb/videobridge.conf
deleted file mode 100644
index a11edc6..0000000
--- a/app/jitsi/integration/jvb/videobridge.conf
+++ /dev/null
@@ -1,290 +0,0 @@
-videobridge {
-  entity-expiration {
-    # If an entity has no activity after this timeout, it is expired
-    timeout=1 minute
-
-    # The interval at which the videobridge will check for expired entities
-    check-interval=${videobridge.entity-expiration.timeout}
-  }
-  health {
-    # The interval between health checks
-    interval=10 seconds
-
-    # The timeout for a health check
-    timeout=30 seconds
-
-    # If performing a health check takes longer than this, it is considered unsuccessful.
-    max-check-duration=3 seconds
-
-    # Whether or not health check failures should be 'sticky'
-    # (i.e. once the bridge becomes unhealthy, it will never
-    # go back to a healthy state)
-    sticky-failures=false
-  }
-  ep-connection-status {
-    # How long we'll wait for an endpoint to *start* sending
-    # data before we consider it 'inactive'
-    first-transfer-timeout=15 seconds
-
-    # How long an endpoint can be 'inactive' before it will
-    # be considered disconnected
-    max-inactivity-limit=3 seconds
-
-    # How often we check endpoint's connectivity status
-    check-interval=500 milliseconds
-  }
-  cc {
-    bwe-change-threshold=0.15
-    thumbnail-max-height-px=180
-    onstage-ideal-height-px=1080
-    onstage-preferred-height-px=360
-    onstage-preferred-framerate=30
-    enable-onstage-video-suspend=false
-    trust-bwe=true
-
-    # How often we check to send probing data
-    padding-period=15ms
-
-    # How often we'll force recalculations of forwarded
-    # streams
-    max-time-between-calculations = 15 seconds
-
-    # A JVB-wide last-n value, observed by all endpoints.  Endpoints
-    # will take the minimum of their setting and this one (-1 implies
-    # no last-n limit)
-    jvb-last-n = -1
-  }
-  # The APIs by which the JVB can be controlled
-  apis {
-    xmpp-client {
-      # The interval at which presence is published in the configured MUCs.
-      presence-interval = ${videobridge.stats.interval}
-
-      configs {
-        unique-xmpp-server {
-          hostname="jitsi-xmpp"
-          domain = "auth.jitsi"
-          username = "jvb"
-          password = "jvbpass"
-          port = 5222
-          muc_jids = "jvbbrewery@internal.auth.jitsi"
-          # The muc_nickname must be unique across all jitsi-videobridge instances
-          muc_nickname = "unique-jvb-server"
-          disable_certificate_verification = false
-        }
-        # example-connection-id {
-        #   For the properties which should be
-        #   filled out here, see MucClientConfiguration
-        # }
-      }
-    }
-    # The COLIBRI REST API
-    rest {
-      enabled = true
-    }
-    jvb-api {
-      enabled = true
-    }
-  }
-  # Configuration of the different REST APIs.
-  # Note that the COLIBRI REST API is configured under videobridge.apis.rest instead.
-  rest {
-    debug {
-      enabled = true
-    }
-    health {
-      enabled = true
-    }
-    shutdown {
-      # Note that the shutdown API requires the COLIBRI API to also be enabled.
-      enabled = false
-    }
-    version {
-      enabled = true
-    }
-  }
-  http-servers {
-    # The HTTP server which hosts services intended for 'public' use
-    # (e.g. websockets for the bridge channel connection)
-    public {
-      # See JettyBundleActivatorConfig in Jicoco for values
-      port = -1
-      tls-port = -1
-    }
-    # The HTTP server which hosts services intended for 'private' use
-    # (e.g. health or debug stats)
-    private {
-      # See JettyBundleActivatorConfig in Jicoco for values
-      host = 127.0.0.1
-    }
-  }
-  octo {
-    # Whether or not Octo is enabled
-    enabled=false
-
-    # A string denoting the 'region' of this JVB.  This region
-    # will be used by Jicofo in the selection of a bridge for
-    # a client by comparing it to the client's region.
-    # Must be set when 'enabled' is true
-    #region="us-west-1"
-
-    # The address on which the Octo relay should bind
-    # Must be set when 'enabled' is true
-    #bind-address=198.51.100.1
-
-    # The port to which the Octo relay should bind
-    bind-port=4096
-
-    # The address which controls the public address which
-    # will be part of the Octo relayId
-    #public-address=198.51.100.1
-
-    # The size of the incoming octo queue. This queue is per-remote-endpoint,
-    # so it matches what we use for local endpoints
-    recv-queue-size=1024
-
-    # The size of the outgoing octo queue.  This is a per-originating-endpoint
-    # queue, so assuming all packets are routed (as they currently are for Octo)
-    # it should be the same size as the transceiver recv queue in
-    # jitsi-media-transform.  Repeating the description from there:
-    #   Assuming 300pps for high-definition, 200pps for standard-definition,
-    #   100pps for low-definition and 50pps for audio, this queue is fed
-    #   650pps, so its size in terms of millis is 1024/650*1000 ~= 1575ms.
-    send-queue-size=1024
-  }
-  load-management {
-    # Whether or not the reducer will be enabled to take actions to mitigate load
-    reducer-enabled = false
-    load-measurements {
-      packet-rate {
-        # The packet rate at which we'll consider the bridge overloaded
-        load-threshold = 50000
-        # The packet rate at which we'll consider the bridge 'underloaded' enough
-        # to start recovery
-        recovery-threshold = 40000
-      }
-    }
-    load-reducers {
-      last-n {
-        # The factor by which we'll reduce the current last-n when trying to reduce load
-        reduction-scale = .75
-        # The factor by which we'll increase the current last-n when trying to recover
-        recover-scale = 1.25
-        # The minimum time in between runs of the last-n reducer to reduce or recover from
-        # load
-        impact-time = 1 minute
-        # The lowest value we'll set for last-n
-        minimum-last-n-value = 0
-        # The highest last-n value we'll enforce.  Once the enforced last-n exceeds this value
-        # we'll remove the limit entirely
-        maximum-enforced-last-n-value = 40
-      }
-    }
-  }
-  sctp {
-    # Whether SCTP data channels are enabled.
-    enabled=true
-  }
-  stats {
-    # Whether periodic collection of statistics is enabled or not. When enabled they are accessible through the REST
-    # API (at `/colibri/stats`), and are available to other modules (e.g. to be pushed to callstats or in a MUC).
-    enabled = true
-
-    # The interval at which stats are gathered.
-    interval = 5 seconds
-
-    # Configuration related to pushing statistics to callstats.io.
-    callstats {
-      # An integer application ID (use 0 to disable pushing stats to callstats).
-      app-id = 0
-
-      # The shared secred to authentication with callstats.io.
-      //app-secret = "s3cret"
-
-      # ID of the key that was used to generate token.
-      //key-id = "abcd"
-
-      # The path to private key file.
-      //key-path = "/etc/jitsi/videobridge/ecpriv.jwk"
-
-      # The ID of the server instance to be used when reporting to callstats.
-      bridge-id = "jitsi"
-
-      # TODO: document
-      //conference-id-prefix = "abcd"
-
-      # The interval at which statististics will be published to callstats. This affects both per-conference and global
-      # statistics.
-      # Note that this value will be overriden if a "callstatsio" transport is defined in the parent "stats" section.
-      interval = ${videobridge.stats.interval}
-    }
-  }
-  websockets {
-    enabled=false
-    server-id="default-id"
-
-    # Optional, even when 'enabled' is set to true
-    # tls=true
-    # Must be set when enabled = true
-    #domain="some-domain"
-  }
-  ice {
-    tcp {
-      # Whether ICE/TCP is enabled.
-      enabled = true
-
-      # The port to bind to for ICE/TCP.
-      port = 8089
-
-      # An optional additional port to advertise.
-      # mapped-port = 8443
-      # Whether to use "ssltcp" or plain "tcp".
-      ssltcp = true
-    }
-
-    udp {
-        # The port for ICE/UDP.
-        port = 10000
-    }
-
-    # An optional prefix to include in STUN username fragments generated by the bridge.
-    #ufrag-prefix = "jvb-123:"
-
-    # Which candidate pairs to keep alive. The accepted values are defined in ice4j's KeepAliveStrategy:
-    # "selected_and_tcp", "selected_only", or "all_succeeded".
-    keep-alive-strategy = "selected_and_tcp"
-
-    # Whether to use the "component socket" feature of ice4j.
-    use-component-socket = true
-
-    # Whether to attempt DNS resolution for remote candidates that contain a non-literal address. When set to 'false'
-    # such candidates will be ignored.
-    resolve-remote-candidates = false
-
-    # The nomination strategy to use for ICE.  THe accepted values are defined in ice4j's NominationStrategy:
-    # "NominateFirstValid", "NominateHighestPriority", "NominateFirstHostOrReflexiveValid", or "NominateBestRTT".
-    nomination-strategy = "NominateFirstValid"
-  }
-
-  transport {
-    send {
-      # The size of the dtls-transport outgoing queue. This is a per-participant
-      # queue. Packets from the egress end-up in this queue right before
-      # transmission by the outgoing srtp pipeline (which mainly consists of the
-      # packet sender).
-      #
-      # Its size needs to be of the same order of magnitude as the rtp sender
-      # queue. In a 100 participant call, assuming 300pps for the on-stage and
-      # 100pps for low-definition, last-n 20 and 2 participants talking, so
-      # 2*50pps for audio, this queue is fed 300+19*100+2*50 = 2300pps, so its
-      # size in terms of millis is 1024/2300*1000 ~= 445ms.
-      queue-size=1024
-    }
-  }
-
-  version {
-    // Wheather to announe the jitsi-videobridge version to clients in the ServerHello message.
-    announce = false
-  }
-}
-