From d76a8576f440a90d87fbeaabc80131eadafc88b7 Mon Sep 17 00:00:00 2001 From: Alex Auvolat Date: Mon, 31 May 2021 17:13:36 +0200 Subject: Reorganize documentation --- doc/book/src/quick_start/index.md | 266 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 266 insertions(+) create mode 100644 doc/book/src/quick_start/index.md (limited to 'doc/book/src/quick_start/index.md') diff --git a/doc/book/src/quick_start/index.md b/doc/book/src/quick_start/index.md new file mode 100644 index 00000000..d564f760 --- /dev/null +++ b/doc/book/src/quick_start/index.md @@ -0,0 +1,266 @@ +# Quick Start + +Let's start your Garage journey! +In this chapter, we explain how to deploy Garage as a single-node server +and how to interact with it. + +Our goal is to introduce you to Garage's workflows. +Following this guide is recommended before moving on to +[configuring a real-world deployment](../cookbook/real_world.md). + +Note that this kind of deployment should not be used in production, as it provides +no redundancy for your data! +We will also skip intra-cluster TLS configuration, meaning that if you add nodes +to your cluster, communication between them will not be secure. + +## Get a binary + +Download the latest Garage binary from the release pages on our repository: + + + +Place this binary somewhere in your `$PATH` so that you can invoke the `garage` +command directly (for instance you can copy the binary in `/usr/local/bin` +or in `~/.local/bin`). + +If a binary of the last version is not available for your architecture, +you can [build Garage from source](../cookbook/from_source.md). + + +## Writing a first configuration file + +This first configuration file should allow you to get started easily with the simplest +possible Garage deployment: + +```toml +metadata_dir = "/tmp/meta" +data_dir = "/tmp/data" + +replication_mode = "none" + +rpc_bind_addr = "[::]:3901" + +bootstrap_peers = [] + +[s3_api] +s3_region = "garage" +api_bind_addr = "[::]:3900" + +[s3_web] +bind_addr = "[::]:3902" +root_domain = ".web.garage" +index = "index.html" +``` + +Save your configuration file as `garage.toml`. + +As you can see in the `metadata_dir` and `data_dir` parameters, we are saving Garage's data +in `/tmp` which gets erased when your system reboots. This means that data stored on this +Garage server will not be persistent. Change these to locations on your local disk if you want +your data to be persisted properly. + + +## Launching the Garage server + +Use the following command to launch the Garage server with our configuration file: + +``` +garage server -c garage.toml +``` + +By default, Garage displays almost no output. You can tune Garage's verbosity as follows +(from less verbose to more verbose): + +``` +RUST_LOG=garage=info garage server -c garage.toml +RUST_LOG=garage=debug garage server -c garage.toml +RUST_LOG=garage=trace garage server -c garage.toml +``` + +Log level `info` is recommended for most use cases. +Log level `debug` can help you check why your S3 API calls are not working. + + +## Checking that Garage runs correctly + +The `garage` utility is also used as a CLI tool to configure your Garage deployment. +It tries to connect to a Garage server through the RPC protocol, by default looking +for a Garage server at `localhost:3901`. + +Since our deployment already binds to port 3901, the following command should be sufficient +to show Garage's status: + +``` +garage status +``` + +This should show something like this: + +``` +Healthy nodes: +2a638ed6c775b69a… linuxbox 127.0.0.1:3901 UNCONFIGURED/REMOVED +``` + +## Configuring your Garage node + +Configuring the nodes in a Garage deployment means informing Garage +of the disk space available on each node of the cluster +as well as the zone (e.g. datacenter) each machine is located in. + +For our test deployment, we are using only one node. The way in which we configure +it does not matter, you can simply write: + +```bash +garage node configure -z dc1 -c 1 +``` + +where `` corresponds to the identifier of the node shown by `garage status` (first column). +You can enter simply a prefix of that identifier. +For instance here you could write just `garage node configure -z dc1 -c 1 2a63`. + + + + +## Creating buckets and keys + +In this section, we will suppose that we want to create a bucket named `nextcloud-bucket` +that will be accessed through a key named `nextcloud-app-key`. + +Don't forget that `help` command and `--help` subcommands can help you anywhere, +the CLI tool is self-documented! Two examples: + +``` +garage help +garage bucket allow --help +``` + +#### Create a bucket + +Let's take an example where we want to deploy NextCloud using Garage as the +main data storage. + +First, create a bucket with the following command: + +``` +garage bucket create nextcloud-bucket +``` + +Check that everything went well: + +``` +garage bucket list +garage bucket info nextcloud-bucket +``` + +#### Create an API key + +The `nextcloud-bucket` bucket now exists on the Garage server, +however it cannot be accessed until we add an API key with the proper access rights. + +Note that API keys are independent of buckets: +one key can access multiple buckets, multiple keys can access one bucket. + +Create an API key using the following command: + +``` +garage key new --name nextcloud-app-key +``` + +The output should look as follows: + +``` +Key name: nextcloud-app-key +Key ID: GK3515373e4c851ebaad366558 +Secret key: 7d37d093435a41f2aab8f13c19ba067d9776c90215f56614adad6ece597dbb34 +Authorized buckets: +``` + +Check that everything works as intended: + +``` +garage key list +garage key info nextcloud-app-key +``` + +#### Allow a key to access a bucket + +Now that we have a bucket and a key, we need to give permissions to the key on the bucket: + +``` +garage bucket allow \ + --read \ + --write + nextcloud-bucket \ + --key nextcloud-app-key +``` + +You can check at any time the allowed keys on your bucket with: + +``` +garage bucket info nextcloud-bucket +``` + + +## Uploading and downlading from Garage + +We recommend the use of MinIO Client to interact with Garage files (`mc`). +Instructions to install it and use it are provided on the +[MinIO website](https://docs.min.io/docs/minio-client-quickstart-guide.html). +Before reading the following, you need a working `mc` command on your path. + +Note that on certain Linux distributions such as Arch Linux, the Minio client binary +is called `mcli` instead of `mc` (to avoid name clashes with the Midnight Commander). + +#### Configure `mc` + +You need your access key and secret key created above. +We will assume you are invoking `mc` on the same machine as the Garage server, +your S3 API endpoint is therefore `http://127.0.0.1:3900`. +For this whole configuration, you must set an alias name: we chose `my-garage`, that you will used for all commands. + +Adapt the following command accordingly and run it: + +```bash +mc alias set \ + my-garage \ + http://127.0.0.1:3900 \ + \ + \ + --api S3v4 +``` + +You must also add an environment variable to your configuration to +inform MinIO of our region (`garage` by default, corresponding to the `s3_region` parameter +in the configuration file). +The best way is to add the following snippet to your `$HOME/.bash_profile` +or `$HOME/.bashrc` file: + +```bash +export MC_REGION=garage +``` + +#### Use `mc` + +You can not list buckets from `mc` currently. + +But the following commands and many more should work: + +```bash +mc cp image.png my-garage/nextcloud-bucket +mc cp my-garage/nextcloud-bucket/image.png . +mc ls my-garage/nextcloud-bucket +mc mirror localdir/ my-garage/another-bucket +``` + + +#### Other tools for interacting with Garage + +The following tools can also be used to send and recieve files from/to Garage: + +- the [AWS CLI](https://aws.amazon.com/cli/) +- [`rclone`](https://rclone.org/) +- [Cyberduck](https://cyberduck.io/) +- [`s3cmd`](https://s3tools.org/s3cmd) + +Refer to the ["configuring clients"](../cookbook/clients.md) to learn how to configure +these clients to interact with a Garage server. -- cgit v1.2.3