aboutsummaryrefslogtreecommitdiff
path: root/doc/book/operations
diff options
context:
space:
mode:
Diffstat (limited to 'doc/book/operations')
-rw-r--r--doc/book/operations/layout.md221
1 files changed, 209 insertions, 12 deletions
diff --git a/doc/book/operations/layout.md b/doc/book/operations/layout.md
index 5e314246..ece17ddb 100644
--- a/doc/book/operations/layout.md
+++ b/doc/book/operations/layout.md
@@ -9,18 +9,30 @@ a certain capacity, or a gateway node that does not store data and is only
used as an API entry point for faster cluster access.
An introduction to building cluster layouts can be found in the [production deployment](@/documentation/cookbook/real-world.md) page.
+In Garage, all of the data that can be stored in a given cluster is divided
+into slices which we call *partitions*. Each partition is stored by
+one or several nodes in the cluster
+(see [`replication_mode`](@/documentation/reference-manual/configuration.md#replication-mode)).
+The layout determines the correspondence between these partition,
+which exist on a logical level, and actual storage nodes.
+
## How cluster layouts work in Garage
-In Garage, a cluster layout is composed of the following components:
+A cluster layout is composed of the following components:
-- a table of roles assigned to nodes
+- a table of roles assigned to nodes, defined by the user
+- an optimal assignation of partitions to nodes, computed by an algorithm that is ran once when calling `garage layout apply` or the ApplyClusterLayout API endpoint
- a version number
Garage nodes will always use the cluster layout with the highest version number.
Garage nodes also maintain and synchronize between them a set of proposed role
changes that haven't yet been applied. These changes will be applied (or
-canceled) in the next version of the layout
+canceled) in the next version of the layout.
+
+All operations on the layout can be realized using the `garage` CLI or using the
+[administration API endpoint](@/documentation/reference-manual/admin-api.md).
+We give here a description of CLI commands, the admin API semantics are very similar.
The following commands insert modifications to the set of proposed role changes
for the next layout version (but they do not create the new layout immediately):
@@ -51,7 +63,7 @@ commands will fail otherwise.
## Warnings about Garage cluster layout management
-**Warning: never make several calls to `garage layout apply` or `garage layout
+**⚠️ Never make several calls to `garage layout apply` or `garage layout
revert` with the same value of the `--version` flag. Doing so can lead to the
creation of several different layouts with the same version number, in which
case your Garage cluster will become inconsistent until fixed.** If a call to
@@ -65,13 +77,198 @@ shell, you shouldn't have much issues as long as you run commands one after
the other and take care of checking the output of `garage layout show`
before applying any changes.
-If you are using the `garage` CLI to script layout changes, follow the following recommendations:
+If you are using the `garage` CLI or the admin API to script layout changes,
+follow the following recommendations:
+
+- If using the CLI, make all of your `garage` CLI calls to the same RPC host.
+ If using the admin API, make all of your API calls to the same Garage node. Do
+ not connect to individual nodes to send them each a piece of the layout changes
+ you are making, as the changes propagate asynchronously between nodes and might
+ not all be taken into account at the time when the new layout is applied.
+
+- **Only call `garage layout apply`/ApplyClusterLayout once**, and call it
+ **strictly after** all of the `layout assign` and `layout remove`
+ commands/UpdateClusterLayout API calls have returned.
+
+
+## Understanding unexpected layout calculations
+
+When adding, removing or modifying nodes in a cluster layout, sometimes
+unexpected assigntations of partitions to node can occur. These assignations
+are in fact normal and logical, given the objectives of the algorihtm. Indeed,
+**the layout algorithm prioritizes moving less data between nodes over the fact
+of achieving equal distribution of load. It also tries to use all links between
+pairs of nodes in equal proportions when moving data.** This section presents
+two examples and illustrates how one can control Garage's behavior to obtain
+the desired results.
+
+### Example 1
+
+In this example, a cluster is originally composed of 3 nodes in 3 different
+zones (data centers). The three nodes are of equal capacity, therefore they
+are all fully exploited and all store a copy of all of the data in the cluster.
+
+Then, a fourth node of the same size is added in the datacenter `dc1`.
+As illustrated by the following, **Garage will by default not store any data on the new node**:
+
+```
+$ garage layout show
+==== CURRENT CLUSTER LAYOUT ====
+ID Tags Zone Capacity Usable capacity
+b10c110e4e854e5a node1 dc1 1000.0 MB 1000.0 MB (100.0%)
+a235ac7695e0c54d node2 dc2 1000.0 MB 1000.0 MB (100.0%)
+62b218d848e86a64 node3 dc3 1000.0 MB 1000.0 MB (100.0%)
+
+Zone redundancy: maximum
+
+Current cluster layout version: 6
+
+==== STAGED ROLE CHANGES ====
+ID Tags Zone Capacity
+a11c7cf18af29737 node4 dc1 1000.0 MB
+
+
+==== NEW CLUSTER LAYOUT AFTER APPLYING CHANGES ====
+ID Tags Zone Capacity Usable capacity
+b10c110e4e854e5a node1 dc1 1000.0 MB 1000.0 MB (100.0%)
+a11c7cf18af29737 node4 dc1 1000.0 MB 0 B (0.0%)
+a235ac7695e0c54d node2 dc2 1000.0 MB 1000.0 MB (100.0%)
+62b218d848e86a64 node3 dc3 1000.0 MB 1000.0 MB (100.0%)
+
+Zone redundancy: maximum
+
+==== COMPUTATION OF A NEW PARTITION ASSIGNATION ====
+
+Partitions are replicated 3 times on at least 3 distinct zones.
+
+Optimal partition size: 3.9 MB (3.9 MB in previous layout)
+Usable capacity / total cluster capacity: 3.0 GB / 4.0 GB (75.0 %)
+Effective capacity (replication factor 3): 1000.0 MB
+
+A total of 0 new copies of partitions need to be transferred.
+
+dc1 Tags Partitions Capacity Usable capacity
+ b10c110e4e854e5a node1 256 (0 new) 1000.0 MB 1000.0 MB (100.0%)
+ a11c7cf18af29737 node4 0 (0 new) 1000.0 MB 0 B (0.0%)
+ TOTAL 256 (256 unique) 2.0 GB 1000.0 MB (50.0%)
+
+dc2 Tags Partitions Capacity Usable capacity
+ a235ac7695e0c54d node2 256 (0 new) 1000.0 MB 1000.0 MB (100.0%)
+ TOTAL 256 (256 unique) 1000.0 MB 1000.0 MB (100.0%)
+
+dc3 Tags Partitions Capacity Usable capacity
+ 62b218d848e86a64 node3 256 (0 new) 1000.0 MB 1000.0 MB (100.0%)
+ TOTAL 256 (256 unique) 1000.0 MB 1000.0 MB (100.0%)
+```
+
+While unexpected, this is logical because of the following facts:
+
+- storing some data on the new node does not help increase the total quantity
+ of data that can be stored on the cluster, as the two other zones (`dc2` and
+ `dc3`) still need to store a full copy of everything, and their capacity is
+ still the same;
+
+- there is therefore no need to move any data on the new node as this would be pointless;
+
+- moving data to the new node has a cost which the algorithm decides to not pay if not necessary.
+
+This distribution of data can however not be what the administrator wanted: if
+they added a new node to `dc1`, it might be because the existing node is too
+slow, and they wish to divide its load by half. In that case, what they need to
+do to force Garage to distribute the data between the two nodes is to attribute
+only half of the capacity to each node in `dc1` (in our example, 500M instead of 1G).
+In that case, Garage would determine that to be able to store 1G in total, it
+would need to store 500M on the old node and 500M on the added one.
+
+
+### Example 2
+
+The following example is a slightly different scenario, where `dc1` had two
+nodes that were used at 50%, and `dc2` and `dc3` each have one node that is
+100% used. All node capacities are the same.
+
+Then, a node from `dc1` is moved into `dc3`. One could expect that the roles of
+`dc1` and `dc3` would simply be swapped: the remaining node in `dc1` would be
+used at 100%, and the two nodes now in `dc3` would be used at 50%. Instead,
+this happens:
+
+```
+==== CURRENT CLUSTER LAYOUT ====
+ID Tags Zone Capacity Usable capacity
+b10c110e4e854e5a node1 dc1 1000.0 MB 500.0 MB (50.0%)
+a11c7cf18af29737 node4 dc1 1000.0 MB 500.0 MB (50.0%)
+a235ac7695e0c54d node2 dc2 1000.0 MB 1000.0 MB (100.0%)
+62b218d848e86a64 node3 dc3 1000.0 MB 1000.0 MB (100.0%)
+
+Zone redundancy: maximum
+
+Current cluster layout version: 8
+
+==== STAGED ROLE CHANGES ====
+ID Tags Zone Capacity
+a11c7cf18af29737 node4 dc3 1000.0 MB
+
+
+==== NEW CLUSTER LAYOUT AFTER APPLYING CHANGES ====
+ID Tags Zone Capacity Usable capacity
+b10c110e4e854e5a node1 dc1 1000.0 MB 1000.0 MB (100.0%)
+a235ac7695e0c54d node2 dc2 1000.0 MB 1000.0 MB (100.0%)
+62b218d848e86a64 node3 dc3 1000.0 MB 753.9 MB (75.4%)
+a11c7cf18af29737 node4 dc3 1000.0 MB 246.1 MB (24.6%)
+
+Zone redundancy: maximum
+
+==== COMPUTATION OF A NEW PARTITION ASSIGNATION ====
+
+Partitions are replicated 3 times on at least 3 distinct zones.
+
+Optimal partition size: 3.9 MB (3.9 MB in previous layout)
+Usable capacity / total cluster capacity: 3.0 GB / 4.0 GB (75.0 %)
+Effective capacity (replication factor 3): 1000.0 MB
+
+A total of 128 new copies of partitions need to be transferred.
+
+dc1 Tags Partitions Capacity Usable capacity
+ b10c110e4e854e5a node1 256 (128 new) 1000.0 MB 1000.0 MB (100.0%)
+ TOTAL 256 (256 unique) 1000.0 MB 1000.0 MB (100.0%)
+
+dc2 Tags Partitions Capacity Usable capacity
+ a235ac7695e0c54d node2 256 (0 new) 1000.0 MB 1000.0 MB (100.0%)
+ TOTAL 256 (256 unique) 1000.0 MB 1000.0 MB (100.0%)
+
+dc3 Tags Partitions Capacity Usable capacity
+ 62b218d848e86a64 node3 193 (0 new) 1000.0 MB 753.9 MB (75.4%)
+ a11c7cf18af29737 node4 63 (0 new) 1000.0 MB 246.1 MB (24.6%)
+ TOTAL 256 (256 unique) 2.0 GB 1000.0 MB (50.0%)
+```
+
+As we can see, the node that was moved to `dc3` (node4) is only used at 25% (approximatively),
+whereas the node that was already in `dc3` (node3) is used at 75%.
+
+This can be explained by the following:
+
+- node1 will now be the only node remaining in `dc1`, thus it has to store all
+ of the data in the cluster. Since it was storing only half of it before, it has
+ to retrieve the other half from other nodes in the cluster.
+
+- The data which it does not have is entirely stored by the other node that was
+ in `dc1` and that is now in `dc3` (node4). There is also a copy of it on node2
+ and node3 since both these nodes have a copy of everything.
+
+- node3 and node4 are the two nodes that will now be in a datacenter that is
+ under-utilized (`dc3`), this means that those are the two candidates from which
+ data can be removed to be moved to node1.
+
+- Garage will move data in equal proportions from all possible sources, in this
+ case it means that it will tranfer 25% of the entire data set from node3 to
+ node1 and another 25% from node4 to node1.
-- Make all of your `garage` CLI calls to the same RPC host. Do not use the
- `garage` CLI to connect to individual nodes to send them each a piece of the
- layout changes you are making, as the changes propagate asynchronously
- between nodes and might not all be taken into account at the time when the
- new layout is applied.
+This explains why node3 ends with 75% utilization (100% from before minus 25%
+that is moved to node1), and node4 ends with 25% (50% from before minus 25%
+that is moved to node1).
-- **Only call `garage layout apply` once**, and call it **strictly after** all
- of the `layout assign` and `layout remove` commands have returned.
+This illustrates the second principle of the layout computation: **if there is
+a choice in moving data out of some nodes, then all links between pairs of
+nodes are used in equal proportions** (this is approximately true, there is
+randomness in the algorihtm to achieve this so there might be some small
+fluctuations, as we see above).