aboutsummaryrefslogtreecommitdiff
path: root/doc/book/cookbook
diff options
context:
space:
mode:
Diffstat (limited to 'doc/book/cookbook')
-rw-r--r--doc/book/cookbook/_index.md6
-rw-r--r--doc/book/cookbook/durability-repairs.md114
-rw-r--r--doc/book/cookbook/real-world.md2
-rw-r--r--doc/book/cookbook/recovering.md110
-rw-r--r--doc/book/cookbook/upgrading.md85
5 files changed, 2 insertions, 315 deletions
diff --git a/doc/book/cookbook/_index.md b/doc/book/cookbook/_index.md
index 07bf6ebf..ff90ad52 100644
--- a/doc/book/cookbook/_index.md
+++ b/doc/book/cookbook/_index.md
@@ -1,7 +1,7 @@
+++
title="Cookbook"
template = "documentation.html"
-weight = 2
+weight = 20
sort_by = "weight"
+++
@@ -37,7 +37,3 @@ This chapter could also be referred as "Tutorials" or "Best practices".
- **[Monitoring Garage](@/documentation/cookbook/monitoring.md)** This page
explains the Prometheus metrics available for monitoring the Garage
cluster/nodes.
-
-- **[Recovering from failures](@/documentation/cookbook/recovering.md):** Garage's first selling point is resilience
- to hardware failures. This section explains how to recover from such a failure in the
- best possible way.
diff --git a/doc/book/cookbook/durability-repairs.md b/doc/book/cookbook/durability-repairs.md
deleted file mode 100644
index 46eb25b8..00000000
--- a/doc/book/cookbook/durability-repairs.md
+++ /dev/null
@@ -1,114 +0,0 @@
-+++
-title = "Durability & Repairs"
-weight = 50
-+++
-
-To ensure the best durability of your data and to fix any inconsistencies that may
-pop up in a distributed system, Garage provides a serires of repair operations.
-This guide will explain the meaning of each of them and when they should be applied.
-
-
-# General syntax of repair operations
-
-Repair operations described below are of the form `garage repair <repair_name>`.
-These repairs will not launch without the `--yes` flag, which should
-be added as follows: `garage repair --yes <repair_name>`.
-By default these repair procedures will only run on the Garage node your CLI is
-connecting to. To run on all nodes, add the `-a` flag as follows:
-`garage repair -a --yes <repair_name>`.
-
-# Data block operations
-
-## Data store scrub
-
-Scrubbing the data store means examining each individual data block to check that
-their content is correct, by verifying their hash. Any block found to be corrupted
-(e.g. by bitrot or by an accidental manipulation of the datastore) will be
-restored from another node that holds a valid copy.
-
-A scrub is run automatically by Garage every 30 days. It can also be launched
-manually using `garage repair scrub start`.
-
-To view the status of an ongoing scrub, first find the task ID of the scrub worker
-using `garage worker list`. Then, run `garage worker info <scrub_task_id>` to
-view detailed runtime statistics of the scrub. To gather cluster-wide information,
-this command has to be run on each individual node.
-
-A scrub is a very disk-intensive operation that might slow down your cluster.
-You may pause an ongoing scrub using `garage repair scrub pause`, but note that
-the scrub will resume automatically 24 hours later as Garage will not let your
-cluster run without a regular scrub. If the scrub procedure is too intensive
-for your servers and is slowing down your workload, the recommended solution
-is to increase the "scrub tranquility" using `garage repair scrub set-tranquility`.
-A higher tranquility value will make Garage take longer pauses between two block
-verifications. Of course, scrubbing the entire data store will also take longer.
-
-## Block check and resync
-
-In some cases, nodes hold a reference to a block but do not actually have the block
-stored on disk. Conversely, they may also have on disk blocks that are not referenced
-any more. To fix both cases, a block repair may be run with `garage repair blocks`.
-This will scan the entire block reference counter table to check that the blocks
-exist on disk, and will scan the entire disk store to check that stored blocks
-are referenced.
-
-It is recommended to run this procedure when changing your cluster layout,
-after the metadata tables have finished synchronizing between nodes
-(usually a few hours after `garage layout apply`).
-
-## Inspecting lost blocks
-
-In extremely rare situations, data blocks may be unavailable from the entire cluster.
-This means that even using `garage repair blocks`, some nodes may be unable
-to fetch data blocks for which they hold a reference.
-
-These errors are stored on each node in a list of "block resync errors", i.e.
-blocks for which the last resync operation failed.
-This list can be inspected using `garage block list-errors`.
-These errors usually fall into one of the following categories:
-
-1. a block is still referenced but the object was deleted, this is a case
- of metadata reference inconsistency (see below for the fix)
-2. a block is referenced by a non-deleted object, but could not be fetched due
- to a transient error such as a network failure
-3. a block is referenced by a non-deleted object, but could not be fetched due
- to a permanent error such as there not being any valid copy of the block on the
- entire cluster
-
-To help make the difference between cases 1 and cases 2 and 3, you may use the
-`garage block info` command to see which objects hold a reference to each block.
-
-In the second case (transient errors), Garage will try to fetch the block again
-after a certain time, so the error should disappear natuarlly. You can also
-request Garage to try to fetch the block immediately using `garage block retry-now`
-if you have fixed the transient issue.
-
-If you are confident that you are in the third scenario and that your data block
-is definitely lost, then there is no other choice than to declare your S3 objects
-as unrecoverable, and to delete them properly from the data store. This can be done
-using the `garage block purge` command.
-
-
-# Metadata operations
-
-## Metadata table resync
-
-Garage automatically resyncs all entries stored in the metadata tables every hour,
-to ensure that all nodes have the most up-to-date version of all the information
-they should be holding.
-The resync procedure is based on a Merkle tree that allows to efficiently find
-differences between nodes.
-
-In some special cases, e.g. before an upgrade, you might want to run a table
-resync manually. This can be done using `garage repair tables`.
-
-## Metadata table reference fixes
-
-In some very rare cases where nodes are unavailable, some references between objects
-are broken. For instance, if an object is deleted, the underlying versions or data
-blocks may still be held by Garage. If you suspect that such corruption has occurred
-in your cluster, you can run one of the following repair procedures:
-
-- `garage repair versions`: checks that all versions belong to a non-deleted object, and purges any orphan version
-- `garage repair block_refs`: checks that all block references belong to a non-deleted object version, and purges any orphan block reference (this will then allow the blocks to be garbage-collected)
-
diff --git a/doc/book/cookbook/real-world.md b/doc/book/cookbook/real-world.md
index 0b9e016c..7061069f 100644
--- a/doc/book/cookbook/real-world.md
+++ b/doc/book/cookbook/real-world.md
@@ -345,7 +345,7 @@ garage layout apply
```
**WARNING:** if you want to use the layout modification commands in a script,
-make sure to read [this page](@/documentation/reference-manual/layout.md) first.
+make sure to read [this page](@/documentation/operations/layout.md) first.
## Using your Garage cluster
diff --git a/doc/book/cookbook/recovering.md b/doc/book/cookbook/recovering.md
deleted file mode 100644
index 1c6a6763..00000000
--- a/doc/book/cookbook/recovering.md
+++ /dev/null
@@ -1,110 +0,0 @@
-+++
-title = "Recovering from failures"
-weight = 60
-+++
-
-Garage is meant to work on old, second-hand hardware.
-In particular, this makes it likely that some of your drives will fail, and some manual intervention will be needed.
-Fear not! For Garage is fully equipped to handle drive failures, in most common cases.
-
-## A note on availability of Garage
-
-With nodes dispersed in 3 zones or more, here are the guarantees Garage provides with the 3-way replication strategy (3 copies of all data, which is the recommended replication mode):
-
-- The cluster remains fully functional as long as the machines that fail are in only one zone. This includes a whole zone going down due to power/Internet outage.
-- No data is lost as long as the machines that fail are in at most two zones.
-
-Of course this only works if your Garage nodes are correctly configured to be aware of the zone in which they are located.
-Make sure this is the case using `garage status` to check on the state of your cluster's configuration.
-
-In case of temporarily disconnected nodes, Garage should automatically re-synchronize
-when the nodes come back up. This guide will deal with recovering from disk failures
-that caused the loss of the data of a node.
-
-
-## First option: removing a node
-
-If you don't have spare parts (HDD, SDD) to replace the failed component, and if there are enough remaining nodes in your cluster
-(at least 3), you can simply remove the failed node from Garage's configuration.
-Note that if you **do** intend to replace the failed parts by new ones, using this method followed by adding back the node is **not recommended** (although it should work),
-and you should instead use one of the methods detailed in the next sections.
-
-Removing a node is done with the following command:
-
-```bash
-garage layout remove <node_id>
-garage layout show # review the changes you are making
-garage layout apply # once satisfied, apply the changes
-```
-
-(you can get the `node_id` of the failed node by running `garage status`)
-
-This will repartition the data and ensure that 3 copies of everything are present on the nodes that remain available.
-
-
-
-## Replacement scenario 1: only data is lost, metadata is fine
-
-The recommended deployment for Garage uses an SSD to store metadata, and an HDD to store blocks of data.
-In the case where only a single HDD crashes, the blocks of data are lost but the metadata is still fine.
-
-This is very easy to recover by setting up a new HDD to replace the failed one.
-The node does not need to be fully replaced and the configuration doesn't need to change.
-We just need to tell Garage to get back all the data blocks and store them on the new HDD.
-
-First, set up a new HDD to store Garage's data directory on the failed node, and restart Garage using
-the existing configuration. Then, run:
-
-```bash
-garage repair -a --yes blocks
-```
-
-This will re-synchronize blocks of data that are missing to the new HDD, reading them from copies located on other nodes.
-
-You can check on the advancement of this process by doing the following command:
-
-```bash
-garage stats -a
-```
-
-Look out for the following output:
-
-```
-Block manager stats:
- resync queue length: 26541
-```
-
-This indicates that one of the Garage node is in the process of retrieving missing data from other nodes.
-This number decreases to zero when the node is fully synchronized.
-
-
-## Replacement scenario 2: metadata (and possibly data) is lost
-
-This scenario covers the case where a full node fails, i.e. both the metadata directory and
-the data directory are lost, as well as the case where only the metadata directory is lost.
-
-To replace the lost node, we will start from an empty metadata directory, which means
-Garage will generate a new node ID for the replacement node.
-We will thus need to remove the previous node ID from Garage's configuration and replace it by the ID of the new node.
-
-If your data directory is stored on a separate drive and is still fine, you can keep it, but it is not necessary to do so.
-In all cases, the data will be rebalanced and the replacement node will not store the same pieces of data
-as were originally stored on the one that failed. So if you keep the data files, the rebalancing
-might be faster but most of the pieces will be deleted anyway from the disk and replaced by other ones.
-
-First, set up a new drive to store the metadata directory for the replacement node (a SSD is recommended),
-and for the data directory if necessary. You can then start Garage on the new node.
-The restarted node should generate a new node ID, and it should be shown with `NO ROLE ASSIGNED` in `garage status`.
-The ID of the lost node should be shown in `garage status` in the section for disconnected/unavailable nodes.
-
-Then, replace the broken node by the new one, using:
-
-```bash
-garage layout assign <new_node_id> --replace <old_node_id> \
- -c <capacity> -z <zone> -t <node_tag>
-garage layout show # review the changes you are making
-garage layout apply # once satisfied, apply the changes
-```
-
-Garage will then start synchronizing all required data on the new node.
-This process can be monitored using the `garage stats -a` command.
diff --git a/doc/book/cookbook/upgrading.md b/doc/book/cookbook/upgrading.md
deleted file mode 100644
index 5a2850c0..00000000
--- a/doc/book/cookbook/upgrading.md
+++ /dev/null
@@ -1,85 +0,0 @@
-+++
-title = "Upgrading Garage"
-weight = 70
-+++
-
-Garage is a stateful clustered application, where all nodes are communicating together and share data structures.
-It makes upgrade more difficult than stateless applications so you must be more careful when upgrading.
-On a new version release, there is 2 possibilities:
- - protocols and data structures remained the same ➡️ this is a **minor upgrade**
- - protocols or data structures changed ➡️ this is a **major upgrade**
-
-You can quickly now what type of update you will have to operate by looking at the version identifier:
-when we require our users to do a major upgrade, we will always bump the first nonzero component of the version identifier
-(e.g. from v0.7.2 to v0.8.0).
-Conversely, for versions that only require a minor upgrade, the first nonzero component will always stay the same (e.g. from v0.8.0 to v0.8.1).
-
-Major upgrades are designed to be run only between contiguous versions.
-Example: migrations from v0.7.1 to v0.8.0 and from v0.7.0 to v0.8.2 are supported but migrations from v0.6.0 to v0.8.0 are not supported.
-
-The `garage_build_info`
-[Prometheus metric](@/documentation/reference-manual/monitoring.md) provides
-an overview for which Garage versions are currently in use within a cluster.
-
-## Minor upgrades
-
-Minor upgrades do not imply cluster downtime.
-Before upgrading, you should still read [the changelog](https://git.deuxfleurs.fr/Deuxfleurs/garage/releases) and ideally test your deployment on a staging cluster before.
-
-When you are ready, start by checking the health of your cluster.
-You can force some checks with `garage repair`, we recommend at least running `garage repair --all-nodes --yes tables` which is very quick to run (less than a minute).
-You will see that the command correctly terminated in the logs of your daemon, or using `garage worker list` (the repair workers should be in the `Done` state).
-
-Finally, you can simply upgrade nodes one by one.
-For each node: stop it, install the new binary, edit the configuration if needed, restart it.
-
-## Major upgrades
-
-Major upgrades can be done with minimal downtime with a bit of preparation, but the simplest way is usually to put the cluster offline for the duration of the migration.
-Before upgrading, you must read [the changelog](https://git.deuxfleurs.fr/Deuxfleurs/garage/releases) and you must test your deployment on a staging cluster before.
-
-We write guides for each major upgrade, they are stored under the "Working Documents" section of this documentation.
-
-### Major upgrades with full downtime
-
-From a high level perspective, a major upgrade looks like this:
-
- 1. Disable API access (for instance in your reverse proxy, or by commenting the corresponding section in your Garage configuration file and restarting Garage)
- 2. Check that your cluster is idle
- 3. Make sure the health of your cluster is good (see `garage repair`)
- 4. Stop the whole cluster
- 5. Back up the metadata folder of all your nodes, so that you will be able to restore it if the upgrade fails (data blocks being immutable, they should not be impacted)
- 6. Install the new binary, update the configuration
- 7. Start the whole cluster
- 8. If needed, run the corresponding migration from `garage migrate`
- 9. Make sure the health of your cluster is good
- 10. Enable API access (reverse step 1)
- 11. Monitor your cluster while load comes back, check that all your applications are happy with this new version
-
-### Major upgarades with minimal downtime
-
-There is only one operation that has to be coordinated cluster-wide: the switch of one version of the internal RPC protocol to the next.
-This means that an upgrade with very limited downtime can simply be performed from one major version to the next by restarting all nodes
-simultaneously in the new version.
-The downtime will simply be the time required for all nodes to stop and start again, which should be less than a minute.
-If all nodes fail to stop and restart simultaneously, some nodes might be temporarily shut out from the cluster as nodes using different RPC protocol
-versions are prevented to talk to one another.
-
-The entire procedure would look something like this:
-
-1. Make sure the health of your cluster is good (see `garage repair`)
-
-2. Take each node offline individually to back up its metadata folder, bring them back online once the backup is done.
- You can do all of the nodes in a single zone at once as that won't impact global cluster availability.
- Do not try to make a backup of the metadata folder of a running node.
-
-3. Prepare your binaries and configuration files for the new Garage version
-
-4. Restart all nodes simultaneously in the new version
-
-5. If any specific migration procedure is required, it is usually in one of the two cases:
-
- - It can be run on online nodes after the new version has started, during regular cluster operation.
- - it has to be run offline
-
- For this last step, please refer to the specific documentation pertaining to the version upgrade you are doing.