1 files changed, 55 insertions, 8 deletions
diff --git a/doc/book/cookbook/real-world.md b/doc/book/cookbook/real-world.md
index 4fcb5cf7..5423bbab 100644
--- a/doc/book/cookbook/real-world.md
+++ b/doc/book/cookbook/real-world.md
@@ -11,8 +11,9 @@ We recommend first following the [quick start guide](@/documentation/quick-start
 to get familiar with Garage's command line and usage patterns.
 
 
+## Preparing your environment
 
-## Prerequisites
+### Prerequisites
 
 To run a real-world deployment, make sure the following conditions are met:
 
@@ -21,10 +22,6 @@ To run a real-world deployment, make sure the following conditions are met:
 - Each machine has a public IP address which is reachable by other machines.
   Running behind a NAT is likely to be possible but hasn't been tested for the latest version (TODO).
 
-- Ideally, each machine should have a SSD available in addition to the HDD you are dedicating
-  to Garage. This will allow for faster access to metadata and has the potential
-  to significantly reduce Garage's response times.
-
 - This guide will assume you are using Docker containers to deploy Garage on each node. 
   Garage can also be run independently, for instance as a [Systemd service](@/documentation/cookbook/systemd.md).
   You can also use an orchestrator such as Nomad or Kubernetes to automatically manage
@@ -49,6 +46,42 @@ available in the different locations of your cluster is roughly the same.
 For instance, here, the Mercury node could be moved to Brussels; this would allow the cluster
 to store 2 TB of data in total.
 
+### Best practices
+
+- If you have fast dedicated networking between all your nodes, and are planing to store
+  very large files, bump the `block_size` configuration parameter to 10 MB
+  (`block_size = 10485760`).
+
+- Garage stores its files in two locations: it uses a metadata directory to store frequently-accessed
+  small metadata items, and a data directory to store data blocks of uploaded objects.
+  Ideally, the metadata directory would be stored on an SSD (smaller but faster),
+  and the data directory would be stored on an HDD (larger but slower).
+
+- For the data directory, Garage already does checksumming and integrity verification,
+  so there is no need to use a filesystem such as BTRFS or ZFS that does it.
+  We recommend using XFS for the data partition, as it has the best performance.
+  EXT4 is not recommended as it has more strict limitations on the number of inodes,
+  which might cause issues with Garage when large numbers of objects are stored.
+
+- If you only have an HDD and no SSD, it's fine to put your metadata alongside the data
+  on the same drive. Having lots of RAM for your kernel to cache the metadata will
+  help a lot with performance.  Make sure to use the LMDB database engine,
+  instead of Sled, which suffers from quite bad performance degradation on HDDs.
+  Sled is still the default for legacy reasons, but is not recommended anymore.
+
+- For the metadata storage, Garage does not do checksumming and integrity
+  verification on its own. If you are afraid of bitrot/data corruption,
+  put your metadata directory on a BTRFS partition. Otherwise, just use regular
+  EXT4 or XFS.
+
+- Having a single server with several storage drives is currently not very well
+  supported in Garage ([#218](https://git.deuxfleurs.fr/Deuxfleurs/garage/issues/218)).
+  For an easy setup, just put all your drives in a RAID0 or a ZFS RAIDZ array.
+  If you're adventurous, you can try to format each of your disk as
+  a separate XFS partition, and then run one `garage` daemon per disk drive,
+  or use something like [`mergerfs`](https://github.com/trapexit/mergerfs) to merge
+  all your disks in a single union filesystem that spreads load over them.
+
 ## Get a Docker image
 
 Our docker image is currently named `dxflrs/garage` and is stored on the [Docker Hub](https://hub.docker.com/r/dxflrs/garage/tags?page=1&ordering=last_updated).
@@ -76,11 +109,12 @@ especially you must consider the following folders/files:
   this folder will be your main data storage and must be on a large storage (e.g. large HDD)
 
 
-A valid `/etc/garage/garage.toml` for our cluster would look as follows:
+A valid `/etc/garage.toml` for our cluster would look as follows:
 
 ```toml
 metadata_dir = "/var/lib/garage/meta"
 data_dir = "/var/lib/garage/data"
+db_engine = "lmdb"
 
 replication_mode = "3"
 
@@ -90,8 +124,6 @@ rpc_bind_addr = "[::]:3901"
 rpc_public_addr = "<this node's public IP>:3901"
 rpc_secret = "<RPC secret>"
 
-bootstrap_peers = []
-
 [s3_api]
 s3_region = "garage"
 api_bind_addr = "[::]:3900"
@@ -132,6 +164,21 @@ It should be restarted automatically at each reboot.
 Please note that we use host networking as otherwise Docker containers
 can not communicate with IPv6.
 
+If you want to use `docker-compose`, you may use the following `docker-compose.yml` file as a reference:
+
+```yaml
+version: "3"
+services:
+  garage:
+    image: dxflrs/garage:v0.8.0
+    network_mode: "host"
+    restart: unless-stopped
+    volumes:
+      - /etc/garage.toml:/etc/garage.toml
+      - /var/lib/garage/meta:/var/lib/garage/meta
+      - /var/lib/garage/data:/var/lib/garage/data
+```
+
 Upgrading between Garage versions should be supported transparently,
 but please check the relase notes before doing so!
 To upgrade, simply stop and remove this container and